The quantity of Poly Aluminium Chloride (PAC) to use depends on various factors, including water quality and specific treatment goals. Here are general guidelines:

1.Typical Dosage Ranges

Drinking Water Treatment:

5 to 50 mg/L (milligrams per liter)

2.Wastewater Treatment:

10 to 200 mg/L, depending on the level of turbidity and contaminants.

3.Industrial Applications:

Varies widely based on specific requirements (usually determined through jar tests).

Application Steps

1.Conduct Jar Tests: To find the optimal dosage for your specific conditions.

2.Adjust Dosage: Based on water quality testing and treatment goals.

Note

Always refer to manufacturer recommendations and local regulations when determining the appropriate dosage.